Protect adjacent areas with Majestic Pre-taped Masking Poly and remove any topical coatings with Majestic Ultra Strip. Rinse well. Lightly wet an approximately 15 sqft area with clean water. Do not flood the area. Apply about 3 tablespoons of Granite Polishing Compound in a small 12” line in center of area. Using a heavy duty (at least 125 lbs.) slow speed machine and a natural pad work the product over the area to be polished. Add more water or Granite Polishing Compound as necessary while keeping the cream somewhat thick. Work the product in a slow even side to side motion for about 10 minutes, squeegee back an area to evaluate. If desired level of polish is achieved, wet vacuum, rinse well, wet vacuum again and proceed to the next area. Complete large areas in a checkerboard fashion overlapping areas to blend. Buff with a white pad when finished to remove any residues and increase luster. Always test in an inconspicuous area prior to general use for suitability and results. Some experimentation will be necessary to fine tune the process. In some cases mechanical honing will be required prior to polishing with Granite Polishing Compound.

Read SDS for additional safety precautions before using this product. (Click here for Safety Data Sheet.)